Home » Sawmills & Planermills » Canters, Bandmills & Sawboxes
Select below to view video or information on canters, bandmills and sawboxes. See how these sawlines improve lumber recovery and value. Compare bandmill and circular saw systems.
The HewSaw SL200 is high recovery curve sawing sawline. Log rotation, 4 sided canting, cant saw and rip saw.
The HewSaw R200 is compact single pass machine. High recovery curve sawing sawline. with log rotation, 4 sided canting, rip saw and side board profiling.
The HewSaw DX Sawing is a staged circular sawing process. The DX saws make a precut prior to the cant saws or rip saws. This reduces the load on the main saws allowing for higher speeds.
Log canter line with quad roll log turner, double length infeed, two sided canter, side board profiling and twin or quad circular saws.
The DDM Profile log canter line is a single pass machine designed for curve sawing small to medium sized logs.
Two sided log canter / circular twin line c/w double length infeed designed for processing small to medium sized logs.
The DDM Side Board Profile log canter line is designed for curve sawing small to medium sized logs. Twin or Quad saws.
Log canter line with quad roll log turner, double length infeed, two sided canter and twin or quad circular saws.
Two sided log canter / circular twin line c/w double length infeed designed for processing small to medium sized logs.
The infeed skews and offsets to align the log centreline with the canter centreline. The infeed slews (moves sideways) as the log is processed through the side heads.
The infeed tilts and offsets to align the log bottom with the bottom chipping head. The infeed then slews (moves vertically) as the log is processed through the bottom head.
Designed for processing small to medium sized logs. It features the Knuckle Turner Infeed which combines the function of a Log Turner and Extended Length Infeed into a single compact machine.
The Comact Optimized Length Infeed / Canter / Cetec Twin Bandmill line is a two sided canter designed to produce cants for curve sawing small to medium sized logs
Canters:
Chipper Canters are used to process logs, or blocks, into flitches, cants and boards. A chipping canter usually consists of a log turner, double or single length infeed, chipping section and a saw section.
With a single pass machine, the log turner, infeed, chipping heads, saw section and gang edger are all in one main machine
Double and single length infeed canter systems typically scan the log for optimum rotation and rescan in the infeed after rotation.
Sharp chain log reducers consist of a pipe log turner and sharp chain infeed.
Bandmills:
Bandmills are used to remove side boards, or flitches, from the sides of a cant or log from a canter or sharp chain primary breakdown system as well as a resaw for boards or flitches.
Circular Saw Boxes:
Circular saw boxes are used behind canters to remove side flitches from cants as they are processed through the canter. These saw boxes can be twin circular saws or quad circular saws.
The Canters, Bandmills & Sawboxes section of Online Expos serves the solid wood sector (sawmills, planermills, remanufacturing).